This "3D prefabricated villa" is assembled by using 10 "single buildings". In the process of assembly, each "single building" weighing several tons or even more than ten tons only needs four lifting points to complete all the lifting work, and the structural stability of the building is very excellent.
In addition, this kind of "assembly mode" with "single building" as the module not only solves the problems of traditional "assembly building" such as wall cracking, uneven plate splicing gap, poor sound insulation effect, poor heat insulation effect, but also provides a "self reorganization" high intelligent living space for residents.
In terms of raw materials for villa construction, Chinese businessmen, land and sea, have used their unique "ordinary grade reinforced concrete" as "printing ink". Therefore, no matter the appearance or the living adaptability of the whole villa, it is not much different from the houses we live in at present.
Next, we will walk into the beautiful space of this future building
Enter this "3D prefabricated villa", first of all, the living room part. At the top of the living room, we can see two arc-shaped decorative light strips, which is the "single building" foundation frame we saw before.
The whole villa is not very different from the house we live in at present in terms of senses, but because it is assembled by "single building", the interior walls should be considered as "load-bearing walls". However, if you live in this kind of house in the future, you don't need to "tear down the walls and make holes" in the decoration, because this "3D prefabricated villa" can customize the house pattern according to your requirements, and all you need to do is "soft decoration".
The kitchen of the villa, in this picture, we can see that the upper left corner of the wall has an arc, which is the biggest feature of "3D building".
The lower left corner of the bathroom wall also has a slight arc In addition, it is basically the same as the house we live in now.
In terms of construction period, the overall assembly work of this villa with an area of more than 200 square meters can be completed in only three days, and the production cycle of "single building" in the factory is only about one week. Therefore, this kind of "3D assembly villa" will save more than 60% of the construction period compared with our current construction method.
In addition, during the whole assembly process, only 3-4 workers are needed to complete all the work, and more than 50% of the personnel cost will be saved.
Speaking of this, many friends would like to ask, if you want to own this kind of "3D prefabricated villa", which is not only time-saving, but also very solid, how much money does it cost? According to the introduction of the technicians of Chinese businessmen, land and sea, the construction cost of this villa is not too different from the current traditional "pouring" construction method, so most of the property owners are still able to accept it .
In terms of market prospect, this kind of "3D prefabricated villa" with super IP value and high cost performance is expected to become a new building mode in the fields of new rural construction, cultural and tourism characteristic town, tourism homestay, etc.
At present, based on the technology, Chinese merchants, land and sea, have launched a "joint partner" plan across the country. Therefore, whether you want to own your own villa or join in this high-tech construction industry, you can contact "Chinese businessmen on land and sea", I believe that you will be satisfied!