With the rapid development of science and technology, all kinds of life cognition formed in thousands of years have been completely subverted. This situation has changed the way we communicate with mobile phones; in this way, we are about to realize driverless cars; in addition, we are about to replace the "house type" residential "and" 3D prefabricated buildings "
Since ancient times, Chinese people have always respected the traditional Confucianism of "choosing a place to live in". Therefore, many urban residents, the most important thing in their life may be "constantly changing houses". The purpose of hard work and frugality is to live in the dream "big house" step by step from the initial "small house"; for the rural population, it is "constantly turning over", demolishing the building, building and demolishing One layer changes into two layers, two layers into three layers. In this way, I have attracted my whole life to this kind of "building movement" of "labor and wealth".
However, this "demolished" or "sold to buy" housing improvement may soon be replaced. Recently, a Chinese land and Sea Technology Co., Ltd. (hereinafter referred to as "Chinese land and sea") from China launched a "3D prefabricated building" based on the "3D building printing" technology.
The advantage of this new construction method, in a word, is to overturn the present "demolished the cover" or "sold and bought" into "less added". That is to say, if you feel that one bedroom and one hall are not enough to live in, then add another bedroom; if you want to change a one story bungalow into a two story villa, then add one story directly In this way, it will greatly reduce the owner's replacement cost and construction cycle for "improved housing".
In terms of product mode, the "3D assembly building" of Chinese land and sea uses "single building" such as kitchen and bathroom, living room and bedroom as the main component for factory customization, and all "single buildings" are produced with "3D building printing" technology.
In the printing serial port of buildings, based on its own research and development of "can spray with stones' large particle heavy aggregate concrete" 3D printer as the production tool, with "ordinary polyester reinforced concrete" as the raw material for building printing, and the enterprises mastering this technology are only one in the world.
The main purpose of choosing "ordinary asphalt concrete" as the building raw material is to ensure the structural strength of the building. As you all know, the best building material recognized in the world today is "reinforced concrete", which is a variety of other new building materials. Therefore, the "only global" technical advantage of Chinese land and sea is the key to the wide application of "3D prefabricated building" in the future.
Based on the "original" to ensure the structural strength, the Chinese land and sea also through the "vertical construction, horizontal use" construction process, not only in the construction process can be optimized to tamp the structural density of the building, enhance the building strength; at the same time, in the assembly process, the concept of "horizontal use" to expand the stress area of the single building, enhance the stability of the overall building.
It is based on the raw materials of "ordinary asphalt concrete" and the construction technology of "vertical construction, horizontal use" and other factors that the "single building" of several tons or even dozens of tons produced by Chinese merchants on land and sea needs only four lifting points to complete the lifting work. At least, it can show the "3D prefabricated building" and its reliable structural strength more intuitively at all times, at the same time, it can also reduce the assembly accuracy of the site and save the assembly cost.
In terms of product features, "3D prefabricated building" has two main advantages-
First of all, it can be "self upgrading". After using "3D assembly building", if you want to expand the building area, you only need to add the number of "single building", without damaging the rebuilt building. Therefore, apart from objective factors, "3D prefabricated building" can achieve subjective "unlimited expansion" theoretically.
You can re optimize the layout of the building at any time. No matter how you want to assemble the living room, bedroom, kitchen and bathroom, you can also "off-site" the building. Always is the city, the countryside, the prairie, the mountain or the seaside, as long as you have the land, you can always "pack and move" your house.
In terms of residential adaptability and safety of buildings“ Because 3D prefabricated building uses "ordinary reinforced concrete" as the building raw material, the living adaptability scale is basically the same as that of the building we live in at present; because each "single building" is printed as a whole, just like a "fortress" of reinforced concrete, so in seismic buildings, even more than the traditional "pouring building" Still better.
At present, the Chinese land and sea has basically completed a "3D assembly building" of 10 single buildings. Next, the new building method will be promoted in the global market. In terms of China's market scale, Chinese businessmen will first expand the market based on three market dimensions: rural, base, culture, tourism, real estate, and urban public infrastructure. Among them, for the rural resettlement group, the "customized production in the factory, site assembly and assembly" is absolutely the most ideal plan for the reconstruction of the homestead.
In terms of cost, the cost expenditure of "3D assembly building" of Chinese land and sea is not much different from that of traditional "pouring building"; moreover, because this kind of building can be upgraded and optimized continuously, so the real estate owners don't need to build or buy houses constantly, just enough to live, not enough to add, so as to really improve the quality of life of everyone!
For thousands of years, housing has been known as "real estate". If we want to get a better living environment, we must "stand still". However, the emergence of Chinese land and sea "3D assembly architecture" completely subverts this logic. In the future, the concept of "house type" may no longer exist. Because, as long as the real estate needs, "one room, one hall" immediately becomes "three rooms, two halls" And this kind of life, for us "house slaves", will be wonderful!