Our company's newly developed 3D printing house machinery, 3D printer can print out the building houses binding steel bars with concrete at the construction site. The complete set of equipment may print general civil bungalows, villas, or high-rise building designs. The more complex it is, the more it can play its construction advantages. It greatly reduces the project cost, reduces labor, and cancels construction During the construction, the formwork is directly poured with 3D printer, and the construction period is changed. The printing time of such a villa is only 45 days, which is about 30% lower than the normal conventional buildings. The whole set of equipment is composed of four systems; 1. Raw material proportioning and mixing system 2. Concrete conveying system 3. Printing construction system of 3D printer 4. Overall printer lifting system. 411 systems are combined into a complete construction system.
3D printing house is a new technology in the field of architecture. Its expansion and expansion space is very wide, especially for super high house. It is very difficult to construct the house by using people for a long time. If 3D printer is used to print the building, as long as the design software and materials are in place, the building will be manufactured. For complex building modeling, the building modeling of manual construction cannot be completed. 3D printing The machine can be completed. The 3D printer developed by our company is advanced in building equipment and advanced in technology, but the materials used are very grounded, and the materials used are all raw materials commonly used in the market. The mechanical construction process is constructed according to the existing construction laws and regulations, which is easy to promote and implement. It can even develop and use environmental protection materials and insulation materials in construction, so as to make the wall stronger, more environmental protection and wall The insulation coefficient of solid is higher. 3D printing used to be the concept of propaganda or speculation. It is believed that people can live in houses that meet the intensity requirements at ease. It has been built on the construction site. The houses that live in 3D printing step into our modern society.
The space for the advanced development of 3D printing house technology concept is very wide. If it is widely adopted and applied in the society, it will produce inestimable social benefits. The house price can be reduced, the labor intensity of construction workers can be reduced, the building cost is low, the building is simple, the poor can also live in villas, which can generally improve the quality of life of the people, especially the construction of new countryside, and improve the living conditions of farmers 3D printing technology will have a huge space in the field of construction. 3D printing house equipment, if effectively used and developed, has a very broad prospect. If this technology is extended to the world, the future is immeasurable, especially with some changes, can be restored to use, fast speed, low cost, simple raw materials and environmental protection. In the international bidding, it has a great competitive advantage, and the use of mechanical equipment can reduce management costs and operating costs.
At present, a two-story villa with 400 ㎡ is built in our company, the material cost is about 150000 yuan, the real construction time is 45 days, the wall thickness is 240mm, the height is two floors, each floor is 3 meters high, the 3D printing house equipment for foundation and wall is specially designed according to our traditional building requirements, and the strength of the printed wall meets the existing national regulations and standards, 20 tons per ton , concrete C30 index, 380 cubic meters, actual cost about 500 yuan per square meter. According to laws and regulations, some indexes may be higher. The printed reinforced concrete buildings can meet the requirements of earthquake resistance and shear resistance of the buildings according to the design. The steel bars and raw materials do not have any auxiliary additives. The equipment is advanced and advanced. If it is widely and reasonably used, it is expected to be a revolution in the field of construction.
Of course, there is a process in the development of everything. The equipment we have developed at present also has its two sides. The appearance we see at present may not be enough, there are still defects in the integration of raw materials, and there are still problems in the consistency of supporting equipment. However, the continuous innovation and improvement in the process of practice and recognition will make the equipment more manufactured Perfect.